Aervoe Construction Upside Down Paint, Upside Down Paint | 20 oz Aerosol Can
Construction Grade Upside Down Marking Paint
Aervoe Upside Down Marking Paint is a high quality, construction grade, inverted tip (upside-down) marking paint. Commonly used for marking in the construction sites, locator and utility identification and landscaping, Aervoe Upside Down Paint is priced competitively and can also be used for general purpose marking. Construction Grade Upside down Marking Paint will adhere to most surfaces including pavement, gravel and soil. Paint marks from this construction grade upside down marking paint are bright, durable and will last up to three months. Other colors are available in case quantity purchases. (12 cans per case). Note: Aervoe Construction paint is commonly used by surveyors as an inexpensive upside-down survey paint.
Aervoe Upside Down Paint - 20 oz Aerosol Can Colors and Part Numbers:
- Aervoe Part # 249: Fluorescent Pink
- Aervoe Part #247: Fluorescent Orange
Aervoe Construction Grade Upside Down Paint - Product Data
I. GENERAL DESCRIPTION
Features: This quality marking paint is packaged in a can that may only be operated in an upside down position. It is formulated to meet a variety of marking applications while still providing good initial color visibility, good color retention, and adhesion.
Benefits: Provides great color durability for up to 3 months, depending on traffic and exposure. It meets standards set by OSHA and APWA/ONE Call Systems. It is not affected by moisture or water and it will not wash away once dry. Can be used with the cap on in Aervoe applicators #244/245. The spray through cap eliminates accidental discharge. Each can is non-clogging and empties completely.
Packaging: Aerosol: |
Cans (211 x 713) |
17 oz. net wt. |
(482 grams) |
18.8 fl. oz. |
(557 ml) |
|
Case - 12 cans/case |
18 lbs. |
(7.8 kg) |
.55 CF |
(.016 CM) |
Uses:
254 - Blue 255 - White 256 - Red 257 - Orange |
258 - Hi Vis Yellow 259 - Green 260 - Purple 283 - H.D. Fl. Red-Orange |
Application: Shake can well before use and for 1 to 2 minutes after agitator ball is heard. Remove tab from tamper-resistant cap. With proper alignment of the activator bar, this product can be used with the cap on in Aervoe applicators #244/245. Apply paint 3 to 4 inches from surface as a writing tool, and 5 to 8 inches in the applicator for a 3/4-inch line or continuous directional mark. Keep can in motion during use to prevent puddling. Agitate can periodically during application. Clear paint from valve and tip after each use by turning can in an upright position and spraying for 3 to 5 seconds. For best results, use at temperatures between 60°F and 80°F (16°C to 27°C).
Limitations: Please refer to the Material Safety Data Sheets for specific information on material hazards, etc. This aerosol product is designed to spray at an angle not greater than 30° from vertical.
II. CHARACTERISTICS AND PROPERTIES Average for all colors
Specifications:
Complies with CARB MIR and VOC rules.
Appearance:
Gloss at 60° ..................................................................<5
Class ............................................................................Flat
Coverage: Aerosol
Theoretical–at mil dry ..................................................274 linear ft./can
Practical–at 1/2 mil dry .................................................548 linear ft./can
Drying Schedule: (At 77°F [25°C], 50% Humidity at 1 mil, dry)
To touch ........................................................................30 min. To handle ......................................................................45 min.
Full cure........................................................................8 hrs.
To recoat.......................................................................Anytime.
Performance and Chemical Properties:
Weight per gallon .........................................................7.22 lbs
Specific gravity .............................................................0.87
Viscosity .......................................................................Not applicable
Flammability: Label marking ........................................Extremely Flammable
Flash point ...........................................< 0°F (-18°C)
Operating temperature range .......................................50° to 100°F (10° to 38°C)
Percent solids by weight...............................................14%
Percent solids by volume .............................................7%
Percent pigment by volume ..........................................4%
Volatile Organic Compound level .................................<66% (Non-Fluorescent - 567 gm/l) (Fluorescent - 540 gm/l)
MIR Limit ......................................................................1.20
Interior durability ...........................................................Very Good
Exterior durability..........................................................Fair
Temperature resistance ................................................Not applicable
Color fastness ..............................................................Good
Adhesion ......................................................................Good
Mineral spirits resistance ..............................................Good
Gasoline resistance ......................................................Poor
Motor oil resistance ......................................................Good
Pencil hardness ............................................................Not applicable
Base Materials
Resin system ................................................................Alkyd
Solvents (top two).........................................................VM&P Naptha, Hexanes
Propellant system .........................................................Hydrocarbon
III. SHIPPING, STORAGE AND HEALTH
IMDG number 1950
D.O.T. container spec ...............................................................2P
D.O.T. shipping description .......................................................Consumer commodity
Warehouse storage level number .............................................NFPA 30B Level 1
Hazardous class (CFR-49) .......................................................ORM-D
Storage temperature ................................................................40° to 120°F (4° to 49°C)
Shelf life ....................................................................................12 to 24 months
HMIS ratings
Health ................................................................................1
Fire ....................................................................................2
Reactivity ..........................................................................1
IV. MISCELLANEOUS
The APWA/One Call color designation system is used to identify location and direction of underground cables and pipes for above-ground utility construction. OSHA color assignment is used for physical risk or hazard identification. Contains no Ozone Depleting Substances
(O.D.S.). This product meets MIR and VOC requirements for the State of California.
Color ................APWA/One Call .......................................OSHA
Red ..................Electric ....................................................Danger, stop or location of fire protection equipment
Yellow ...............Gas, Oil ...................................................Caution and physical hazards
Blue ..................Water .......................................................Equipment being repaired. Caution against starting or moving
Green ...............Sewer ......................................................Location of safety equipment other than fire
Orange .............Communication, CATV ............................Dangerous parts of machinery or energized equipment
Purple ...............Reclaimed water .....................................Radiation hazard
Black/White ......White: Proposed excavation ...................Black/White: Traffic and housekeeping
V. WARRANTY
The statements made herein, on labels, product bulletins or by any of our employees or agents concerning this material are given for information only. Any liability whatsoever of Aervoe-Pacific to the user of the product, is limited to replacement of the product or purchase price refunded.
No. 1246 - 2/08
1 Review Hide Reviews Show Reviews
-
paint is working great, no clogs and empting out completly
We will purchase these product again