Archer Pruner Chainsaw Chain | 3/8LP-043-50DL | Semi-Chisel | For 14" Pole Pruner Saws | D-043-50DL

This Archer Pruner Chainsaw Chain is 3/8LP Pitch, .043 gauge and 50 Drive Links. This is (1) loop of very high quality professional Archer brand Saw Chain. Archer 50 drive links pruner chain works great on Pole Saw Pruners that are using a 14" pruner guide bar using .043 gauge chain. This Pruner chain also fits other chain saw brands that are using a 14" Pruner guide bar such as Stihl, Efco etc. Archer D-043-50DL pruner chain replaces part numbers Oregon 90PX50CQ & 90PX050G, Carlton N4C-50E and Stihl 61PMN-50.

Please note:***This chain is a non-safety professional chainsaw chain***

Note: All Chainsaw chains are a called length, in order for your replacement chain to fit you must always match the pitch, gauge and drive link count. The drive link count is the number of drive links in the loop of chain, the drive link is the triangular part of the chain that rides in the groove of the guide bar. The gauge is the width of the opening of your guide bar groove (or the thickness of your drive link) and the most common gauges are .043, .050, .058, and .063. Pitch is the actual measured distance between any three rivet heads on the chainsaw chain divided by two, the most common pitches are ¼”, 3/8LP(low-pro), .325, 3/8” and .404. The pitch and gauge of a chain are not easily measured so the pitch and gauge of your chain is best determined by using the chain manufacturing codes from the old chain that are found stamped on the drive links (and all the chain manufacturers use different codes) also many times the pitch, gauge, and drive link count are found stamped on the tail end of the guide bar. If you need any help in determining what size chain you need please contact us.
 

Archer Guide Bars, Archer Chainsaw Chain and Archer Accessories are sold world wide and are known for quality products!
Share