Conway Cleveland Lumber/Board Rules

Preferred by Lumber Inspectors Everywhere!

The Conway-Cleveland lumber scaling rules are used to measure the board feet content of sawn lumber. Conway Cleveland Lumber rules feature flexible shafts, hand-crafted from the finest split hickory. These Lumber Rules have a special quality, due in large part, to the meticulous care taken in the selection of raw materials. 

Conway Clevaland's patented heads are one-piece, light-weight hardened stainless steel with pre-bent sharpened points for grabbing and flipping the lumber. They will never rust and the points stay sharp a very long time. Bold and black figures are large and crisp for ease of reading. 

Each lumber ruler has a six inch walnut handle, sized for comfort and rounded to fit the palm of your hand. Finally, each lumber rule is protected by two coats of polyurethane, giving lasting abrasion resistance and protection. Three scale configurations offered: 4-line: 9',11',13',15' one side 12',10',14',16' other side. A second 4-line configuration: 4',5',6',7' one side 8',9',10',12' other side. The 3-line configuration: 8',10',18' one side 12',14',16' other side. Two head types: Go-No-Go notched or straight.

We are currently stocking a few configurations of these Lumber Rules, but can order any configuration offered. Please contact us if you need a lumber ruler not showing here.

Lumber Rule Configuration Definitions:

N = Notched Head (Go-No-Go)

R = Straight Head

S = Short 24"

L = Long 39"

LX = X-Long 42"

100 Series Lumber Rules are all 3 Line and available in a straight head only

200 Series Lumber Rules are all 4 Line and available in a straight head only

300 Series Lumber Rules are all 3 Line

400 Series Lumber Rules are all 4 Line